5 Effective Tips to Get Rid of the Mold in Your Car

The presence of mold in a car isn’t something new and the removal isn’t that easy as you probably do at home. Excessive humidity is a common cause of mold in the home and in the car as well. The only difference between the home and car mold is the involvement of some organic material. 

Most of the time it is edible, and when it is mixed with humidity it provides a perfect environment for the growth of mold. This means the vehicles shouldn’t be left unattended for a long time because you never know when it can start growing and sometimes hiring automobile mold remediation Nashville TN becomes inevitable. Below you can find some good tips that you can use to get rid of mold in your car easily.  

1. Gear up

Getting rid of mold is important but personal safety takes precedence. When a vehicle is left alone for a long time without detailing or basic cleaning, then the growth of mold can be expected. No one can tell how fast the mold growth would start but if you’ve parked your car outside the garage, then rapid growth is expected. 

Once the mold has taken roots in the vehicle it is advised not to approach the vehicle carelessly. You can easily get the best automobile ceramic coating in Nashville TN, but first, you have to do something about the mold. If no air has passed through the car for a long time, the growth of mold can accumulate some dangerous gases, especially if it is black mold. Buy a respirator mask before stepping in the car.

1. Remove the trash

It is a well-known fact that mold wouldn’t attack the car if you keep your car clean all the time, but that doesn’t mean you need car detailing every week. However, if you didn’t do it in the last couple of months, leaving your car locked for a long time wouldn’t be wise. 

The remnants of food or organic trash boost up the mold growth when mixed with humidity. That’s why when you start the mold removal process it is important to take care of trash first that has caused it. If you never let the trash accumulate in your car, then you can completely avoid the mold forever. 

1. Brush away the large clusters

Once you have removed the trash, now it is time to deal with the mold. The mold grows in the form of clusters and you have to get rid of them all starting from the bigger ones. Take a regular car brush and brush it away, but before that put on the respirator mask because the mold dust can be harmful. 

Make sure you select a sunny day and open environment to clean up your vehicle. Open all of the windows and the doors so the dust can escape quickly and the overall scenario becomes harmless. 

1. Apply the salt treatment

Salt has a deadly impact on the mold but makes sure you use non-iodized salt for the treatment. The objective is to get rid of mold in the larger areas quickly. Choose a sunny day and use the commercially available salt and mix it with the water. Once the solution is ready apply it directly on the mold by using a spray bottle and make sure that you soak the affected area. 

Afterward, let it dry in the sun and when it dries you can say goodbye to the mold spores forever. Now just use the vacuum cleaner to suck out what is left. It is recommended to move out the car carpet and wash it separately because the mold can be present under the carpet as well. 

1. Use vinegar

White vinegar is one of the most commonly used items to get rid of carpet mold. It is probably due to its availability that it is a widely used product. You just have to use a dilute vinegar solution and apply it directly to the carpet and it will burn away all of the molds. 

However, You can easily get the best automobiles ceramic coating Nashville TN if the level of infestation is huge, then you may choose to use vinegar only. Just be careful because using direct vinegar would leave a vinegar smell on the carpet. If you are going with raw vinegar, then you must rinse the carpet several times with water or until it is completely odorless.

The presence of mold in the car needs immediate action because if you leave it any longer, then you might need to replace the interior. There are countless remedies that you can use to get rid of mold, but once you’ve used a remedy it is advised to keep an eye on the vehicle. 

Because sometimes the mold comes back because of the severe infestation. If that’s the case, you might have to apply the remedy more than one time.